Lexar has a long history of serving the flash-based consumer storage market in the form of SSDs, memory cards, and USB flash drives. After having started out as a Micron brand, the company was acquired in 2017 by Longsys which has diversified its product lineup with regular introduction of new products. Recently, the company announced a number of portable SSDs targeting different market segments. The Lexar SL500 Portable SSD is one of the moderately priced 20 Gbps PSSDs in that set.
The SL500 is able to achieve its price point thanks to the use of a native USB flash controller – the Silicon Motion SM2320. The unique aspect is the use of YMTC 3D TLC NAND (compared to the usual Micron or BiCS NAND that we have seen in previous SM2320-based PSSDs). This review takes a detailed look at the SL500, including an analysis of its internals and evaluation of its performance consistency, power consumption, and thermal profile.
Introduction and Product Impressions
External bus-powered storage devices have been growing in storage capacity as well as access speeds over the last decade. Advancements in flash technology (such as the advent of 3D NAND and NVMe) and the evolution of faster host interfaces (such as Thunderbolt 3 and USB 3.x / USB4). As a result, we have been seeing palm-sized flash-based storage devices capable of delivering 3GBps+ speeds. While those speeds can be achieved with Thunderbolt 4, mass-market devices have to rely on USB. Within the USB ecosystem, USB 3.2 Gen 2 (10 Gbps) is fast becoming the entry level for thumb drives and portable SSDs. USB 3.2 Gen 2×2 (20 Gbps) got off to a slow start, but recent computing platforms from both Intel and AMD have started to support it on the host side. The introduction of native USB 3.2 Gen 2×2 flash controllers such as the Phison U18 and Silicon Motion SM2320 has enabled PSSD vendors to bring low-cost power-efficient 20 Gbps external drives to the market.
Broadly speaking, there are currently five distinct performance levels in the PSSD market:
- 2GBps+ drives with Thunderbolt 3 or USB4, using NVMe SSDs
- 2GBps drives with USB 3.2 Gen 2×2, using NVMe SSDs or direct USB flash drive (UFD) controllers
- 1GBps drives with USB 3.2 Gen 2, using NVMe SSDs or direct UFD controllers
- 500MBps drives with USB 3.2 Gen 1 (or, Gen 2, in some cases), using SATA SSDs
- Sub-400MBps drives with USB 3.2 Gen 1, using UFD controllers
Within each of these levels, there is further segmentation into entry-level, mid-range, and premium based on the choice of internal components. The Lexar SL500 we are looking at today falls under the second category. Lexar touts the ultra-thin nature of the PSSD as a key selling point. The packaging itself is spartan – we have a discrete Type-C to Type-C cable, along with an user guide.
The casing is metal and exudes a sleek and premium look. However, there are no claims of ruggedness or any specific IP ratings. The unit does not have any screws and disassembling involves prying off the plastic tabs at either end and pushing out the internal plastic frame.
The plastic frame itself is a bit oversized for the board, but that seems to have been done keeping in mind the need to make the external casing palm-sized. The gallery below presents some insights into the case design and internals of the PSSD.
Interestingly, the board does not have any explicit thermal solution – no thermal pads or conducting paths to the external casing from either the controller or flash packages. The SM2320 UFD controller is directly visible on the board.
The 1TB version includes four flash packages in a double-sided configuration. The packages are from Longsys themselves with no obvious indication of the NAND inside. Fortunately, we have a publicly available NAND decoder tool for Silicon Motion PSSDs, and that reveals the use of YMTC’s 128L 3D TLC inside the packages.
This review compares the Lexar SL500 against a host of other 2GBps-class PSSDs we have reviewed before. An overview of the internal capabilities of these PSSDs is given by CrystalDiskInfo. The SL500 supports full S.M.A.R.T passthrough, along with TRIM to ensure consistent performance for the drive over its lifetime.
‘,’
‘,’
‘,’
‘,’
‘,’
‘); ]]>| S.M.A.R.T Passthrough – CrystalDiskInfo | |
| Lexar SL500 1TBWD_BLACK P50 1TBWD_BLACK P40 1TBSilicon Motion SM2320XT 1TBLaCie Rugged Mini 2TBKingston XS2000 1TBCrucial X10 Pro 1TBSeagate FireCuda 1TB | WD_BLACK P50 1TBWD_BLACK P40 1TBSilicon Motion SM2320XT 1TBLaCie Rugged Mini 2TBKingston XS2000 1TBCrucial X10 Pro 1TBSeagate FireCuda 1TBLexar SL500 1TB |
 |
 |
The table below presents a comparative view of the specifications of the different storage bridges presented in this review.
105 mm x 66 mm x 16 mm (with bumper)’,’69.54 mm x 32.58 mm x 13.5 mm (without casing)’,’65 mm x 50 mm x 10 mm’,’104.4 mm x 52.5 mm x 10 mm’); var sb_weight = new Array(’43 grams’,’115 grams (without cable)’,’79 grams (without cable)’,’7 grams (without cable and casing)’,’100 grams’,’28.9 grams (without cable and casing)’,’42 grams’,’100 grams (without cable)’); var sb_cable = new Array(’30 cm USB 3.2 Gen 2×2 Type-C (male) to Type-C (male)’,’30 cm USB 3.2 Gen 2×2 Type-C to Type-C
30 cm USB 3.2 Gen 2 Type-C to Type-A’,’30 cm USB 3.2 Gen 2×2 Type-C to Type-C
Attached Type-C female to Type-A male adapter (resultant Type-C to Type-A cable length : 33 cm)’,’N/A’,’21 cm USB 3.2 Gen 2×2 Type-C (male) to Type-C (male)’,’30 cm USB 3.2 Gen 2×2 Type-C to Type-C’,’22 cm USB 3.2 Gen 2×2 Type-C (male) to Type-C (male)’,’50 cm USB 3.2 Gen 2×2 Type-C to Type-C’); var sb_smart = new Array(‘Yes’,’Yes’,’Yes’,’Yes’,’Yes’,’Yes’,’Yes’,’Yes’); var sb_uasp = new Array(‘Yes’,’Yes’,’Yes’,’Yes’,’Yes’,’Yes’,’Yes’,’Yes’); var sb_trim = new Array(‘Yes’,’Yes’,’Yes’,’Yes’,’Yes’,’Yes’,’Yes’,’Yes’); var sb_hwenc = new Array(‘Yes’,’Not Available’,’Not Available’,’Proprietary’,’No’,’N/A’,’Yes’,’Not Available’); var sb_evalstor = new Array(‘YMTC 128L 3D TLC (packaged by Longsys)’,’Western Digital SN750E PCIe 3.0 x4 M.2 2280 NVMe SSD
SanDisk / Toshiba BiCS 4 96L 3D TLC’,’Western Digital SN560E PCIe 3.0 x4 M.2 2280 NVMe SSD
SanDisk / Toshiba BiCS 5 112L 3D TLC’,’Micron 96L 3D TLC’,’Micron B47R 176L 3D TLC (packaged by ADATA)’,’Micron 96L 3D TLC’,’Micron B47R 176L 3D TLC’,’Seagate FireCuda 510 PCIe 3.0 x4 M.2 2280 NVMe SSD
SanDisk / Toshiba BiCS 3 64L 3D TLC’); var sb_price = new Array(‘$118′,’USD 210′,’USD 130′,’USD 160′,’$190′,’USD 135′,’$120′,’USD 210′); var sb_review_link = new Array(‘Lexar SL500 1TB Review’,’WD_BLACK P50 Game Drive SSD 1TB Review #1 (2020)
WD_BLACK P50 Game Drive SSD 1TB Review #2 (2021)’,’WD_BLACK P40 Game Drive SSD 1TB Review’,’Silicon Motion SM2320XT Reference (Kingston XS2000) 1TB Review’,’Crucial X10 Pro 2TB Review’,’Kingston XS2000 1TB Review’,’Crucial X10 Pro 2TB Review’,’Seagate FireCuda Gaming SSD 1TB Review’); ]]>
| Comparative Direct-Attached Storage Devices Configuration | ||
| Aspect | Lexar SL500 1TBWD_BLACK P50 1TBWD_BLACK P40 1TBSilicon Motion SM2320XT 1TBLaCie Rugged Mini 2TBKingston XS2000 1TBCrucial X10 Pro 1TBSeagate FireCuda 1TB | WD_BLACK P50 1TBWD_BLACK P40 1TBSilicon Motion SM2320XT 1TBLaCie Rugged Mini 2TBKingston XS2000 1TBCrucial X10 Pro 1TBSeagate FireCuda 1TBLexar SL500 1TB |
| Downstream Port | Native Flash | 1x PCIe 3.0 x4 (M.2 NVMe) |
| Upstream Port | USB 3.2 Gen 2×2 Type-C (Female) | USB 3.2 Gen 2×2 Type-C |
| Bridge Chip | Silicon Motion SM2320 | ASMedia ASM2364 |
| Power | Bus Powered | Bus Powered |
| Use Case | 2GBps-class, sleek and stylish palm-sized high-performance portable SSD with hardware encryption and a Type-C interface | Premium 2GBps-class, compact, and sturdy portable SSD in a gumstick form-factor targeting the gaming market |
| Physical Dimensions | 85 mm x 54 mm x (4.5 to 7.8) mm | 118 mm x 62 mm x 14 mm |
| Weight | 43 grams | 115 grams (without cable) |
| Cable | 30 cm USB 3.2 Gen 2×2 Type-C (male) to Type-C (male) | 30 cm USB 3.2 Gen 2×2 Type-C to Type-C 30 cm USB 3.2 Gen 2 Type-C to Type-A |
| S.M.A.R.T Passthrough | Yes | Yes |
| UASP Support | Yes | Yes |
| TRIM Passthrough | Yes | Yes |
| Hardware Encryption | Yes | Not Available |
| Evaluated Storage | YMTC 128L 3D TLC (packaged by Longsys) | Western Digital SN750E PCIe 3.0 x4 M.2 2280 NVMe SSD SanDisk / Toshiba BiCS 4 96L 3D TLC |
| Price | $118 | USD 210 |
| Review Link | Lexar SL500 1TB Review | WD_BLACK P50 Game Drive SSD 1TB Review #1 (2020) WD_BLACK P50 Game Drive SSD 1TB Review #2 (2021) |
An interesting aspect of the Lexar SL500 that makes it stand out from the crowd is the availability of 256-bit AES encryption support using Lexar’s custom password-protection software (that needs to be installed on all machines that need access to the contents).
Prior to looking at the benchmark numbers, power consumption, and thermal solution effectiveness, a description of the testbed setup and evaluation methodology is provided.
Testbed Setup and Evaluation Methodology
Direct-attached storage devices (including thumb drives) are evaluated using the Quartz Canyon NUC (essentially, the Xeon / ECC version of the Ghost Canyon NUC) configured with 2x 16GB DDR4-2667 ECC SODIMMs and a PCIe 3.0 x4 NVMe SSD – the IM2P33E8 1TB from ADATA.
The most attractive aspect of the Quartz Canyon NUC is the presence of two PCIe slots (electrically, x16 and x4) for add-in cards. In the absence of a discrete GPU – for which there is no need in a DAS testbed – both slots are available. In fact, we also added a spare SanDisk Extreme PRO M.2 NVMe SSD to the CPU direct-attached M.2 22110 slot in the baseboard in order to avoid DMI bottlenecks when evaluating Thunderbolt 3 devices. This still allows for two add-in cards operating at x8 (x16 electrical) and x4 (x4 electrical). Since the Quartz Canyon NUC doesn’t have a native USB 3.2 Gen 2×2 port, Silverstone’s SST-ECU06 add-in card was installed in the x4 slot. All non-Thunderbolt devices are tested using the Type-C port enabled by the SST-ECU06.
The specifications of the testbed are summarized in the table below:
| The 2021 AnandTech DAS Testbed Configuration | |
| System | Intel Quartz Canyon NUC9vXQNX |
| CPU | Intel Xeon E-2286M |
| Memory | ADATA Industrial AD4B3200716G22 32 GB (2x 16GB) DDR4-3200 ECC @ 22-22-22-52 |
| OS Drive | ADATA Industrial IM2P33E8 NVMe 1TB |
| Secondary Drive | SanDisk Extreme PRO M.2 NVMe 3D SSD 1TB |
| Add-on Card | SilverStone Tek SST-ECU06 USB 3.2 Gen 2×2 Type-C Host |
| OS | Windows 10 Enterprise x64 (21H1) |
| Thanks to ADATA, Intel, and SilverStone Tek for the build components |
The testbed hardware is only one segment of the evaluation. Over the last few years, the typical direct-attached storage workloads for memory cards have also evolved. High bit-rate 4K videos at 60fps have become quite common, and 8K videos are starting to make an appearance. Game install sizes have also grown steadily even in portable game consoles, thanks to high resolution textures and artwork. Keeping these in mind, our evaluation scheme for portable SSDs and UFDs involves multiple workloads which are described in detail in the corresponding sections.
- Synthetic workloads using CrystalDiskMark and ATTO
- Real-world access traces using PCMark 10’s storage benchmark
- Custom robocopy workloads reflective of typical DAS usage
- Sequential write stress test
In the next section, we have an overview of the performance of the Lexar SL500 in these benchmarks. Prior to providing concluding remarks, we have some observations on the PSSD’s power consumption numbers and thermal solution also.